An electronic aluminum frame : suitable for single -sided printed circuit boards, decals, glass, printing and other printing precision require manufacturers to use : semi-automatic screen printing presses operating mainly in the main part of the material is also suitable for manual printing .
2 treadmill printing aluminum frame : suitable treadmill printing, apparel printing , gifts , leather, plastic , glass products and toys printing manufacturers use ; printing jobs mainly for manual -type lines ( running machine ) operations.
3.CD, ceramic Aluminum Alloys frame : suitable for CD player, signs nameplate , Epoxy , keyboard , plastic, shell, etc. require manufacturers to use ordinary printing precision : print jobs to a small area of ??hand printing and printing machines based ; single frame can be customized and curved frames and other special-shaped box.
4 Precision Electronics aluminum frame : suitable for multi-layer circuit boards, LCD , SMT, membrane switch, ceramic decal , tobacco packaging printing manufacturers use high precision requirements : Printing jobs mainly in automatic screen printing machine-based , some are also suitable for precision semi-automatic screen printing presses.
5 large aluminum frame: suitable for large-scale outdoor four -color advertising, light printing, automotive glass, glass curtain wall and other large-format printers used to print large format screen printing work is mainly based.
Aluminum foil products are widely used in recent years, our products, and the emergence of aluminum foil tape truly broad and used in the country's major industries have a very good application...
2013年9月9日星期一
Aluminum material before spraying Process Control
Aluminum Alloys spray a lot of pre-treatment process , depending on the circumstances , such as the spatial location of plant condition that the size of the workpiece material ( cold-rolled plate , hot-rolled plate, galvanized sheet , aluminum , glass, steel , etc. ) , the surface condition ( corrosion , anti-rust oil , debris ) , production volume , quality requirements and other options . Different manufacturers use different processes . If the overall passenger car production processes and quality requirements is basically the same , pre-treatment processes generally have the following two ways:
1 , parts pre-treatment
The typical process:
Pre- degreasing degreasing → ??washing → ??I → II → pickling → ??washing → ??washing in and III → table adjustment phosphate → washing IV → passivation
Our factory can be adjusted to the actual situation :
As pretreatment parts , acid rust is essential. However, the former process , the best corrosion member and non- corrosion member separate pieces pickling corrosion , non- corrosion member is preferably not to be pickled .
2 , pre-treatment products
Pre-treatment of the entire product is immersed in the bath products for surface treatment , there are a lot of manufacturers to adopt . Transfer process between a manual control and automatic control of two . Is the use of more advanced PLC program automatic control, can realize automatic transfer between processes . General process is: degreasing → ??washing → table adjustment phosphate → washing .
Processing used before spraying device is a combination spray cleaning machine , by means of spraying the cleaning principle mechanical and chemical action , to complete degreasing , phosphating , passivation, cleaning processes .
Joint typical spray cleaning machine processes are: degreasing , washing, table transfer, phosphating , passivation , washed with pure water .
Its structure is characterized by: each step pre-treatment production line sprinkler pipe arranged in a tunnel , spray each sump pump to provide. Various processes have openings plate separated to prevent channeling fluid. The form of the heating tank heating tank and outside the tank . Within the heater exhaust pipe, coiled pipe , corrugated board, etc. ; outside heater tube , plate heaters. Heating medium hot water, steam , oil and so on. In degreasing , phosphating processes , respectively, with degreasing systems and slag removal system . To prevent the heating section of the tunnel openings at the top and overflow steam exhaust fan in the tunnel at the top with .
The process control elements are as follows :
1 , skim
Degreasing degreasing agent mechanism is by saponification of various oils , solubilizing , wetting , dispersing , emulsifying effect, so that grease from the surface from , the material becomes soluble or emulsified uniformly dispersed stably in the groove fluid . Quality is evaluated based on skim skim the surface of the workpiece can not have a visual oil, emulsions and other dirt , the surface should be washed thoroughly wetted by water as the standard . The quality depends skim free alkalinity , the temperature of the degreasing liquid , the processing time , mechanical and degreasing liquid oil and other factors :
( 1 ) free alkalinity (FAL)
Degreasing agents in order to ensure the best results the appropriate concentration . Generally only need to detect degreasing fluid free alkalinity , FAL is too low, degreasing effect is relatively poor ; FAL too high, not only caused material waste , but also to increase the burden of back- washing , pollution will be severe after the sequence tables reconcile phosphorus technology .
( 2 ) the temperature of the degreasing liquid
Any one have the best degreasing degreasing liquid temperature, the temperature is lower than process requirements, can not be fully degreasing effect ; temperature is too high , not only increases energy consumption, but also bring some side effects. Such as degreasing agent evaporates too quickly , the workpiece surface is dry from the bath due to faster , easily causing artifacts return to rust , alkali spots , oxidation and other ills affecting the quality phosphide after the procedure . Automatic temperature control also needs to be checked regularly .
( 3 ) Processing time
Degreasing liquid oil on the workpiece must be full contact , there is sufficient contact time in order to ensure a good degreasing effect . But skim too long, blunt workpiece surface will increase , affecting phosphate film formation.
( 4 ) the impact of mechanical action
Degreasing process, supplemented by mechanical action , using pump circulation or workpiece moves , it can strengthen the degreasing effect and shorten the immersion cleaning time ; spray skim skim faster than dipping more than 10 times faster .
( 5 ) degreasing liquid oil content:
With the recycling of the bath , bath oil content will continue to increase inside , when a certain percentage, the degreasing effect of degreasing agents and cleaning efficiency will be significantly decreased , even if the bath by adding the drug to maintain a high concentration , the surface to be treated the cleanliness is still not improved. Degreasing liquid has been aging deterioration , must replace the entire tank . Production is generally based on the use of bath time and processing workload timely exchange slot.
2 , acid
Product manufacturing rolled steel molding or storage in the transport process , the surface will produce rust. As loose rust layer structure , and substrate adhesion is not strong, and can be composed of iron oxide and aluminum primary cells, to further promote aluminum corrosion, the coating will soon be destroyed, so it must be before painting Ex . Product is commonly used pickling rust, it does not make aluminum workpiece deformation , corrosion every corner can be cleaned, rust fast , relatively low cost. Mainly after pickling pickling quality of the workpiece should not be seen visually oxides, rust and corrosion phenomena over the standard , the impact effect of rust main factors :
( 1 ) free acidity (FA)
Determination of free acidity of the pickling tank FA, is to verify the effect of the level of the pickling tank rust most direct and effective evaluation. Low free acidity , rust poor results. Free acidity is too high, the work environment mist larger content is not conducive to labor protection ; aluminum surface is easy to produce "over eclipse " phenomenon ; and residual acid cleaning more difficult, easily lead to subsequent contamination of the bath .
( 2 ) temperature and time
Most pickling is carried out at room temperature , when heated pickling , the general control between 40 ℃ ~ 70 ℃ , while the temperature of the pickling capabilities greater impact, but the temperature is too high will increase the workpiece , corrosion of the equipment , the impact of the work environment is also very unfavorable ; and in the complete removal of rust under the premise of pickling time should be as short as possible to reduce the aluminum corrosion and hydrogen embrittlement . Therefore, the process should be strictly controlled bath temperature and workpiece processing time.
( 3 ) Pollution aging
Acid in rust process, will continue to bring oil or other impurities , which can be suspended impurities fishing manner by scraping to remove ; when soluble iron ions above a certain level , the bath will not only greatly reduce the effects of rust , and the excess iron ions with the surface of the raffinate tank mixed phosphate , phosphate bath pollution accelerated aging, seriously affect the quality of the workpiece phosphate , general acid content of iron ions should be controlled in not more than 6 % 10% is appropriate. Control targets must be replaced over the bath .
3, Table tune
Surface modifier can remove the workpiece surface due to alkali degreasing or pickling rust caused by the unevenness of the surface condition , the aluminum surface to form a large number of fine crystalline center , thus speeding up the reaction rate phosphate , beneficial phosphate film formation.
( 1 ) Water Quality
Used bath water in the aquifer as a serious rust , calcium and magnesium ion content greater surface conditioning liquid will affect the stability of the bath can be prepared in advance to add a water softener to remove liquid water on the surface conditioning effects .
( 2 ) use of time
General Table transfers colloidal titanium salt is used , the existence of colloidal activity , when the use of longer or more impurities contained in the colloidal ions lose activity , time stable colloidal state is destroyed , bath layered sediment , were flocculent In this case you must replace the bath .
4 , phosphate
Phosphate is a chemical and electrochemical reaction to form phosphate chemical conversion coating process , the formation of phosphate chemical conversion film called phosphate coating . Bus Painting commonly used low-temperature zinc phosphating solution . Phosphide main purpose is to provide protection to the aluminum substrate , to a certain extent, to prevent corrosion of aluminum ; used primer before painting , to improve the film layer attached focus and corrosion resistance . Phosphate pre-treatment process is the most important aspect of the reaction mechanism is complex and influenced by many factors , so the phosphate bath relative to the other bath is much more complex production process control .
( 1 ) acid ratio ( total acidity and free acidity ratio )
Phosphate acid ratio improved to accelerate the reaction rate, the phosphate coating thin and delicate, but the acid ratio is too high layer is too thin , it can lead phosphate workpiece hanging gray ; acid ratio is too low, the reaction is slow phosphide , phosphorus of crystal thick porous , corrosion resistance is low, prone to yellow rust phosphating workpiece . Generally phosphating liquid system or a different formula than the size of its acid requirements are also different .
( 2) Temperature
An appropriate increase in the bath temperature , film speed, but the temperature is too high, the changes will affect the acid ratio , thereby affecting the stability of the bath , while thick film nuclei , increasing the amount of the slag bath .
( 3 ) the amount of sediment
As the reaction continued for phosphate , the bath will gradually increase the amount of sediment , the excess sludge can affect the surface of the interface reaction , resulting phosphate film blur, gray hanging serious , or even film , so bath to according to the amount of the workpiece handling and use of timely trough time for slag desludging .
( 4 ) nitrite NO-2 ( accelerator concentration )
NO-2 can accelerate the phosphating reaction speed, increase the density of phosphate coatings and corrosion resistance , the content is too high to make the film prone to the phenomenon of white spots or hair color ; too low, the film is slow , phosphate coating Yi raw yellow rust .
( 5 ) SO2-4 sulfate
Acid concentration is too high or washing lotion are easily lead to poor control of phosphate bath of sulfuric acid ions increased , the high phosphate sulfate ions will slow down the reaction rate, the coarse grain porous phosphate film , hanging ash serious , phosphate coating corrosion resistance decreases.
( 6 ) ferrous ions Fe2 +:
Phosphating solution containing ferrous ions is too high , makes the room temperature phosphate coating corrosion resistance decreased ; make phosphate coating coarse grains in the temperature , the surface floating lime , corrosion resistance decreased ; phosphating sludge will increase in volume and temperature large , the solution becomes cloudy , and the free acidity increased.
5 , passivation ( closed )
The purpose of the passivation film is a closed porosity phosphate , phosphate coating to improve the corrosion resistance , especially to improve the overall coating adhesion and corrosion resistance . The general use of chrome and chrome- containing treatment in two ways, however, some type of passivation with alkaline salts (most phosphate , carbonate , nitrite , phosphate, etc. ) , these substances serious damage paint film 's long-term adhesion and corrosion resistance .
6 , washing
The purpose of washing is to remove from the surface brought out on a bath residue , washed their quality can directly affect the quality of the workpiece and the entire phosphating bath stability. Washing bath generally control the following:
( A ) sludge residue content is not too high . Prone to high levels of ash hung workpiece surface .
( 2 ) the bath surface should be without suspended impurities. General washing method using overflow washing, in order to ensure the bath surface without suspended oil or other impurities.
( 3 ) PH value should be close to neutral bath . PH value is too high or too low are likely to cause bath string grooves , thus affecting subsequent stability of the bath .
1 , parts pre-treatment
The typical process:
Pre- degreasing degreasing → ??washing → ??I → II → pickling → ??washing → ??washing in and III → table adjustment phosphate → washing IV → passivation
Our factory can be adjusted to the actual situation :
As pretreatment parts , acid rust is essential. However, the former process , the best corrosion member and non- corrosion member separate pieces pickling corrosion , non- corrosion member is preferably not to be pickled .
2 , pre-treatment products
Pre-treatment of the entire product is immersed in the bath products for surface treatment , there are a lot of manufacturers to adopt . Transfer process between a manual control and automatic control of two . Is the use of more advanced PLC program automatic control, can realize automatic transfer between processes . General process is: degreasing → ??washing → table adjustment phosphate → washing .
Processing used before spraying device is a combination spray cleaning machine , by means of spraying the cleaning principle mechanical and chemical action , to complete degreasing , phosphating , passivation, cleaning processes .
Joint typical spray cleaning machine processes are: degreasing , washing, table transfer, phosphating , passivation , washed with pure water .
Its structure is characterized by: each step pre-treatment production line sprinkler pipe arranged in a tunnel , spray each sump pump to provide. Various processes have openings plate separated to prevent channeling fluid. The form of the heating tank heating tank and outside the tank . Within the heater exhaust pipe, coiled pipe , corrugated board, etc. ; outside heater tube , plate heaters. Heating medium hot water, steam , oil and so on. In degreasing , phosphating processes , respectively, with degreasing systems and slag removal system . To prevent the heating section of the tunnel openings at the top and overflow steam exhaust fan in the tunnel at the top with .
The process control elements are as follows :
1 , skim
Degreasing degreasing agent mechanism is by saponification of various oils , solubilizing , wetting , dispersing , emulsifying effect, so that grease from the surface from , the material becomes soluble or emulsified uniformly dispersed stably in the groove fluid . Quality is evaluated based on skim skim the surface of the workpiece can not have a visual oil, emulsions and other dirt , the surface should be washed thoroughly wetted by water as the standard . The quality depends skim free alkalinity , the temperature of the degreasing liquid , the processing time , mechanical and degreasing liquid oil and other factors :
( 1 ) free alkalinity (FAL)
Degreasing agents in order to ensure the best results the appropriate concentration . Generally only need to detect degreasing fluid free alkalinity , FAL is too low, degreasing effect is relatively poor ; FAL too high, not only caused material waste , but also to increase the burden of back- washing , pollution will be severe after the sequence tables reconcile phosphorus technology .
( 2 ) the temperature of the degreasing liquid
Any one have the best degreasing degreasing liquid temperature, the temperature is lower than process requirements, can not be fully degreasing effect ; temperature is too high , not only increases energy consumption, but also bring some side effects. Such as degreasing agent evaporates too quickly , the workpiece surface is dry from the bath due to faster , easily causing artifacts return to rust , alkali spots , oxidation and other ills affecting the quality phosphide after the procedure . Automatic temperature control also needs to be checked regularly .
( 3 ) Processing time
Degreasing liquid oil on the workpiece must be full contact , there is sufficient contact time in order to ensure a good degreasing effect . But skim too long, blunt workpiece surface will increase , affecting phosphate film formation.
( 4 ) the impact of mechanical action
Degreasing process, supplemented by mechanical action , using pump circulation or workpiece moves , it can strengthen the degreasing effect and shorten the immersion cleaning time ; spray skim skim faster than dipping more than 10 times faster .
( 5 ) degreasing liquid oil content:
With the recycling of the bath , bath oil content will continue to increase inside , when a certain percentage, the degreasing effect of degreasing agents and cleaning efficiency will be significantly decreased , even if the bath by adding the drug to maintain a high concentration , the surface to be treated the cleanliness is still not improved. Degreasing liquid has been aging deterioration , must replace the entire tank . Production is generally based on the use of bath time and processing workload timely exchange slot.
2 , acid
Product manufacturing rolled steel molding or storage in the transport process , the surface will produce rust. As loose rust layer structure , and substrate adhesion is not strong, and can be composed of iron oxide and aluminum primary cells, to further promote aluminum corrosion, the coating will soon be destroyed, so it must be before painting Ex . Product is commonly used pickling rust, it does not make aluminum workpiece deformation , corrosion every corner can be cleaned, rust fast , relatively low cost. Mainly after pickling pickling quality of the workpiece should not be seen visually oxides, rust and corrosion phenomena over the standard , the impact effect of rust main factors :
( 1 ) free acidity (FA)
Determination of free acidity of the pickling tank FA, is to verify the effect of the level of the pickling tank rust most direct and effective evaluation. Low free acidity , rust poor results. Free acidity is too high, the work environment mist larger content is not conducive to labor protection ; aluminum surface is easy to produce "over eclipse " phenomenon ; and residual acid cleaning more difficult, easily lead to subsequent contamination of the bath .
( 2 ) temperature and time
Most pickling is carried out at room temperature , when heated pickling , the general control between 40 ℃ ~ 70 ℃ , while the temperature of the pickling capabilities greater impact, but the temperature is too high will increase the workpiece , corrosion of the equipment , the impact of the work environment is also very unfavorable ; and in the complete removal of rust under the premise of pickling time should be as short as possible to reduce the aluminum corrosion and hydrogen embrittlement . Therefore, the process should be strictly controlled bath temperature and workpiece processing time.
( 3 ) Pollution aging
Acid in rust process, will continue to bring oil or other impurities , which can be suspended impurities fishing manner by scraping to remove ; when soluble iron ions above a certain level , the bath will not only greatly reduce the effects of rust , and the excess iron ions with the surface of the raffinate tank mixed phosphate , phosphate bath pollution accelerated aging, seriously affect the quality of the workpiece phosphate , general acid content of iron ions should be controlled in not more than 6 % 10% is appropriate. Control targets must be replaced over the bath .
3, Table tune
Surface modifier can remove the workpiece surface due to alkali degreasing or pickling rust caused by the unevenness of the surface condition , the aluminum surface to form a large number of fine crystalline center , thus speeding up the reaction rate phosphate , beneficial phosphate film formation.
( 1 ) Water Quality
Used bath water in the aquifer as a serious rust , calcium and magnesium ion content greater surface conditioning liquid will affect the stability of the bath can be prepared in advance to add a water softener to remove liquid water on the surface conditioning effects .
( 2 ) use of time
General Table transfers colloidal titanium salt is used , the existence of colloidal activity , when the use of longer or more impurities contained in the colloidal ions lose activity , time stable colloidal state is destroyed , bath layered sediment , were flocculent In this case you must replace the bath .
4 , phosphate
Phosphate is a chemical and electrochemical reaction to form phosphate chemical conversion coating process , the formation of phosphate chemical conversion film called phosphate coating . Bus Painting commonly used low-temperature zinc phosphating solution . Phosphide main purpose is to provide protection to the aluminum substrate , to a certain extent, to prevent corrosion of aluminum ; used primer before painting , to improve the film layer attached focus and corrosion resistance . Phosphate pre-treatment process is the most important aspect of the reaction mechanism is complex and influenced by many factors , so the phosphate bath relative to the other bath is much more complex production process control .
( 1 ) acid ratio ( total acidity and free acidity ratio )
Phosphate acid ratio improved to accelerate the reaction rate, the phosphate coating thin and delicate, but the acid ratio is too high layer is too thin , it can lead phosphate workpiece hanging gray ; acid ratio is too low, the reaction is slow phosphide , phosphorus of crystal thick porous , corrosion resistance is low, prone to yellow rust phosphating workpiece . Generally phosphating liquid system or a different formula than the size of its acid requirements are also different .
( 2) Temperature
An appropriate increase in the bath temperature , film speed, but the temperature is too high, the changes will affect the acid ratio , thereby affecting the stability of the bath , while thick film nuclei , increasing the amount of the slag bath .
( 3 ) the amount of sediment
As the reaction continued for phosphate , the bath will gradually increase the amount of sediment , the excess sludge can affect the surface of the interface reaction , resulting phosphate film blur, gray hanging serious , or even film , so bath to according to the amount of the workpiece handling and use of timely trough time for slag desludging .
( 4 ) nitrite NO-2 ( accelerator concentration )
NO-2 can accelerate the phosphating reaction speed, increase the density of phosphate coatings and corrosion resistance , the content is too high to make the film prone to the phenomenon of white spots or hair color ; too low, the film is slow , phosphate coating Yi raw yellow rust .
( 5 ) SO2-4 sulfate
Acid concentration is too high or washing lotion are easily lead to poor control of phosphate bath of sulfuric acid ions increased , the high phosphate sulfate ions will slow down the reaction rate, the coarse grain porous phosphate film , hanging ash serious , phosphate coating corrosion resistance decreases.
( 6 ) ferrous ions Fe2 +:
Phosphating solution containing ferrous ions is too high , makes the room temperature phosphate coating corrosion resistance decreased ; make phosphate coating coarse grains in the temperature , the surface floating lime , corrosion resistance decreased ; phosphating sludge will increase in volume and temperature large , the solution becomes cloudy , and the free acidity increased.
5 , passivation ( closed )
The purpose of the passivation film is a closed porosity phosphate , phosphate coating to improve the corrosion resistance , especially to improve the overall coating adhesion and corrosion resistance . The general use of chrome and chrome- containing treatment in two ways, however, some type of passivation with alkaline salts (most phosphate , carbonate , nitrite , phosphate, etc. ) , these substances serious damage paint film 's long-term adhesion and corrosion resistance .
6 , washing
The purpose of washing is to remove from the surface brought out on a bath residue , washed their quality can directly affect the quality of the workpiece and the entire phosphating bath stability. Washing bath generally control the following:
( A ) sludge residue content is not too high . Prone to high levels of ash hung workpiece surface .
( 2 ) the bath surface should be without suspended impurities. General washing method using overflow washing, in order to ensure the bath surface without suspended oil or other impurities.
( 3 ) PH value should be close to neutral bath . PH value is too high or too low are likely to cause bath string grooves , thus affecting subsequent stability of the bath .
2013年9月7日星期六
Aluminum plant equipment operation and maintenance rules
From the law of that Aluminum Alloys equipment wear, normal wear the longer the better use of equipment. In other words, to make the use of equipment in use on the best, we must ensure that normal wear and tear of equipment equal to the natural life. Thus, we can draw such a basic concept, that is, the device is put into production after use, I hope it is in use of the available time better.
Device performance level of availability of time is determined by the equipment downtime. To achieve this goal, various factors involved, it is the device itself, in addition to the quality of the composition (including performance reliability and durability, the structure is reasonable, the selection of advanced, reasonable, processing, manufacturing quality assurance, etc.) is the basic condition, the use of the correct, rational use, well maintenance, careful management, the objective is to extend the life of equipment requirements, give full play equipment effectiveness, improve the basic conditions for the time availability . Equipment downtime, the more work, the less time available, the time may be lower utilization; Conversely, time availability is higher.
Our vision is to require device can rate one hundred percent of the time. Practical work countless examples show that the same model, same manufacturer in the same period production equipment used in the same environmental conditions, because the conditions of use and maintenance pros and cons, effects a great disparity. This situation not only between two devices, even in the same piece of equipment will vary depending on the operational use of the use of personnel, maintenance level differences, the use effect is not the same.
Device performance level of availability of time is determined by the equipment downtime. To achieve this goal, various factors involved, it is the device itself, in addition to the quality of the composition (including performance reliability and durability, the structure is reasonable, the selection of advanced, reasonable, processing, manufacturing quality assurance, etc.) is the basic condition, the use of the correct, rational use, well maintenance, careful management, the objective is to extend the life of equipment requirements, give full play equipment effectiveness, improve the basic conditions for the time availability . Equipment downtime, the more work, the less time available, the time may be lower utilization; Conversely, time availability is higher.
Our vision is to require device can rate one hundred percent of the time. Practical work countless examples show that the same model, same manufacturer in the same period production equipment used in the same environmental conditions, because the conditions of use and maintenance pros and cons, effects a great disparity. This situation not only between two devices, even in the same piece of equipment will vary depending on the operational use of the use of personnel, maintenance level differences, the use effect is not the same.
Mastic awareness and understanding of complex aluminum
Aluminum Alloys and polymer composite insulating material is a combination of new windows, doors and curtain wall building materials. Through this combination of aluminum profiles form a central insulating interlayer, thus achieving "insulated aluminum" purposes. Insulated aluminum composite bridge mainly wear strip with mastic two types.
Mastic composite aluminum heat energy technology originated in the United States, in general, these techniques are the polymers and aluminum mixed. Companies on behalf of the United States Eliasson type composite aluminum casting technology, by pouring the bridge molded polyurethane insulation inside and outside the two-part aluminum bonding formed into a whole in order to achieve energy-saving purposes. Its performance, technology, cost and so very satisfactory. From the late 1930s, with the widespread use of aluminum doors and windows, some of the innovative American designers began to consider the aluminum door and window insulation is poor, so as to effectively solve the aluminum energy-saving technologies.
Mastic composite aluminum heat energy technology originated in the United States, in general, these techniques are the polymers and aluminum mixed. Companies on behalf of the United States Eliasson type composite aluminum casting technology, by pouring the bridge molded polyurethane insulation inside and outside the two-part aluminum bonding formed into a whole in order to achieve energy-saving purposes. Its performance, technology, cost and so very satisfactory. From the late 1930s, with the widespread use of aluminum doors and windows, some of the innovative American designers began to consider the aluminum door and window insulation is poor, so as to effectively solve the aluminum energy-saving technologies.
2013年9月6日星期五
Aluminum crack causes and solutions
Cracks in the Aluminum Alloys extrusion profiles by tensile stress levels in the surface of different metal lateral tearing . The main cause of this phenomenon , the analysis , mainly the following :
First, because the friction causes the metal surface being attached to the role of tensile stress , when attached to a metal surface is greater than the tensile strength tensile stress is generated when the crack ;
Second, the extrusion temperature is too high , the metal surface tensile strength decline in the cracks under the action of friction ;
Third, the extrusion speed is too fast , the metal surface with tensile stress suffered cracks increase the profile .
The method can solve this reason , only the strict control of the extrusion process parameters to ensure reasonable exit speed and outlet temperatures , in order to reduce the phenomenon of aluminum crack . This requires the company's strict checks and supervision of production processes.
First, because the friction causes the metal surface being attached to the role of tensile stress , when attached to a metal surface is greater than the tensile strength tensile stress is generated when the crack ;
Second, the extrusion temperature is too high , the metal surface tensile strength decline in the cracks under the action of friction ;
Third, the extrusion speed is too fast , the metal surface with tensile stress suffered cracks increase the profile .
The method can solve this reason , only the strict control of the extrusion process parameters to ensure reasonable exit speed and outlet temperatures , in order to reduce the phenomenon of aluminum crack . This requires the company's strict checks and supervision of production processes.
Aluminum and aluminum alloy anodized role
Aluminum and its alloys it will be oxidized in air is known , the aluminum surface is naturally formed oxide film of non- crystalline , it will make the surface of the aluminum metal lose their luster , though this layer of the natural oxide film causes the aluminum metal surface slightly passivated , but very thin , about 4 ~ 5nm, and the porosity , the mechanical properties are poor, it can not effectively prevent the air of various media further corrosion of the aluminum metal .
After anodic oxidation treatment , the aluminum and its alloys can be obtained on the surface layer is much more than the natural oxide film thickness of the dense layer ( from tens to hundreds of micrometers or microns). This layer and then through the artificial oxide film sealing treatment , non- crystalline form of the oxide film into a crystalline oxide film , pores can be closed, so the surface luster of the metal over the long term , corrosion resistance , mechanical strength are improved , dyed also receive decorative appearance. Since aluminum and its alloy products after anodizing has many features , so aluminum anodizing surface treatment of aluminum products in a wider application . In industrial applications can be divided into the following categories .
( 1) to prevent corrosion products : the anodic oxidation film obtained after proper sealing treatment in the atmosphere has good stability . Whether from the sulfuric acid solution , oxalic acid or chromic acid solution obtained in the normal process of the oxide film , which is a very good corrosion resistance , such as household aluminum pan , pot, washing interior and so on. Chromic acid oxidation method is particularly suitable for aluminum welding parts and riveting pieces .
( 2 ) protection - decoration : high transparency in the obtained oxide film , the oxide film can be adsorbed with a variety of organic dyes or inorganic pigments characteristics , the oxide film obtained bright light of various colors and patterns , and in recent years not the emergence of new technology , such as less oxidation times a colored fireworks pattern , wood grain pattern , oxidation offset transfer printing , ceramic oxide , so that the aluminum look more beautiful looking, this layer of color film is both a decorative layer , but also resists , such as lighters , fountain pens and crafts.
( 3 ) as the hard wear layer : in sulfuric acid or oxalic acid solution can be adjusted by the anodization process conditions , to obtain thick and hard layer , the use of film holes and to store the selective absorption properties of the fuel , used effectively to work under conditions of friction state , both lubrication and wear characteristics , such as cars and tractors engine cylinder , piston .
( 4 ) as an electrical insulating layer : Anodized Aluminum and its alloys oxide film having a large resistance characteristics, and the resistance is proportional to the thickness of the film , this feature as an electrical insulating property has a certain practical significance , can be used as capacitors the dielectric can also be used for alumina leather outer cable sheath , its surface layer for insulation instead of rubber and plastic foreskin foreskin is more popular in foreign countries , when the thickness of 27.5μm , the breakdown voltage of 441V. The use of phenolic resin as pore filling , which can increase wear voltage 2 times in the oxalic acid solution , when the film thickness increases , the availability of resistance 200Ω, the breakdown voltage of 980V for quality insulating layer , of course, to use this feature except for the conductor , but also can be used for other electrical appliances and so on.
( 5 ) for painting , plating the bottom : the oxide layer having a porous adsorption capacity and good , and the film and the organic film with good adhesion , the underlying paint can be used . Of phosphoric acid anodized aluminum plating film can be used as the bottom .
( 6 ) used in modern architecture : Since the introduction of aluminum electrolytic coloring process , in recent years, the domestic aspects of architectural aluminum electrolytic coloring applied to the increasing , it is not only suitable for architectural bronze shades , black, red , with its excellent abrasion resistance conventional oxidation in general , particularly worth mentioning is very good fastness , more than 20 years in the atmosphere Needless sun dew color , which is incomparable with oxidative coloring . Oxidized aluminum electrolytic coloring method can be used in building windows and doors not only to do with it shop counters , shelves, etc. are also particularly suitable.
After anodic oxidation treatment , the aluminum and its alloys can be obtained on the surface layer is much more than the natural oxide film thickness of the dense layer ( from tens to hundreds of micrometers or microns). This layer and then through the artificial oxide film sealing treatment , non- crystalline form of the oxide film into a crystalline oxide film , pores can be closed, so the surface luster of the metal over the long term , corrosion resistance , mechanical strength are improved , dyed also receive decorative appearance. Since aluminum and its alloy products after anodizing has many features , so aluminum anodizing surface treatment of aluminum products in a wider application . In industrial applications can be divided into the following categories .
( 1) to prevent corrosion products : the anodic oxidation film obtained after proper sealing treatment in the atmosphere has good stability . Whether from the sulfuric acid solution , oxalic acid or chromic acid solution obtained in the normal process of the oxide film , which is a very good corrosion resistance , such as household aluminum pan , pot, washing interior and so on. Chromic acid oxidation method is particularly suitable for aluminum welding parts and riveting pieces .
( 2 ) protection - decoration : high transparency in the obtained oxide film , the oxide film can be adsorbed with a variety of organic dyes or inorganic pigments characteristics , the oxide film obtained bright light of various colors and patterns , and in recent years not the emergence of new technology , such as less oxidation times a colored fireworks pattern , wood grain pattern , oxidation offset transfer printing , ceramic oxide , so that the aluminum look more beautiful looking, this layer of color film is both a decorative layer , but also resists , such as lighters , fountain pens and crafts.
( 3 ) as the hard wear layer : in sulfuric acid or oxalic acid solution can be adjusted by the anodization process conditions , to obtain thick and hard layer , the use of film holes and to store the selective absorption properties of the fuel , used effectively to work under conditions of friction state , both lubrication and wear characteristics , such as cars and tractors engine cylinder , piston .
( 4 ) as an electrical insulating layer : Anodized Aluminum and its alloys oxide film having a large resistance characteristics, and the resistance is proportional to the thickness of the film , this feature as an electrical insulating property has a certain practical significance , can be used as capacitors the dielectric can also be used for alumina leather outer cable sheath , its surface layer for insulation instead of rubber and plastic foreskin foreskin is more popular in foreign countries , when the thickness of 27.5μm , the breakdown voltage of 441V. The use of phenolic resin as pore filling , which can increase wear voltage 2 times in the oxalic acid solution , when the film thickness increases , the availability of resistance 200Ω, the breakdown voltage of 980V for quality insulating layer , of course, to use this feature except for the conductor , but also can be used for other electrical appliances and so on.
( 5 ) for painting , plating the bottom : the oxide layer having a porous adsorption capacity and good , and the film and the organic film with good adhesion , the underlying paint can be used . Of phosphoric acid anodized aluminum plating film can be used as the bottom .
( 6 ) used in modern architecture : Since the introduction of aluminum electrolytic coloring process , in recent years, the domestic aspects of architectural aluminum electrolytic coloring applied to the increasing , it is not only suitable for architectural bronze shades , black, red , with its excellent abrasion resistance conventional oxidation in general , particularly worth mentioning is very good fastness , more than 20 years in the atmosphere Needless sun dew color , which is incomparable with oxidative coloring . Oxidized aluminum electrolytic coloring method can be used in building windows and doors not only to do with it shop counters , shelves, etc. are also particularly suitable.
2013年8月28日星期三
How to care for aluminum detection tool
In aluminum production, measurement tools for inspectors as their weapons. If the weapon is semi-paralyzed or damage to state that the test results would not make any sense, but there is no supervision of product quality control role. Therefore, measuring the maintenance and care is very important. Here are a few measurement tool maintenance specifications (for commonly used detection tool):
1 Measuring exhausted after, to clean surface stains, Aluminum Strip, loosen the fastening device, when the long-term (one month or more) when not in the measurement surface to be oiled. Gage when not, to put it in a protective case, it is best to use someone full-time, and do measuring unit testing by the authoritative annual record.
(2) Do not use the caliper jaws as the stylus tip, compasses, or other tools, are not allowed to artificially twist two jaws or to gauge when the card board uses.
3 Do not oil stone, emery cloth and rub the surface of measuring surface and measuring reticle part non-metering maintenance personnel, non-demolition, alteration and unauthorized repairs gauges.
4 Do not touch the gage measuring surface, because the hands have sweat and other dirt can contaminate the measuring surface, making it rust. Measuring do with other tools, and metal substances mixed together so as not to bruise measuring tools.
5 gage storage place should be kept clean, dry, no vibration, no corrosive gas, and to stay away from a large range of temperature change place or places where magnetic fields. Storage box measuring gages to clean and dry, are not allowed to store other debris.
6, when the surface has burrs, must go to the net burr, and then measure, or make measuring wear, and will affect the measurement accuracy of the results.
1 Measuring exhausted after, to clean surface stains, Aluminum Strip, loosen the fastening device, when the long-term (one month or more) when not in the measurement surface to be oiled. Gage when not, to put it in a protective case, it is best to use someone full-time, and do measuring unit testing by the authoritative annual record.
(2) Do not use the caliper jaws as the stylus tip, compasses, or other tools, are not allowed to artificially twist two jaws or to gauge when the card board uses.
3 Do not oil stone, emery cloth and rub the surface of measuring surface and measuring reticle part non-metering maintenance personnel, non-demolition, alteration and unauthorized repairs gauges.
4 Do not touch the gage measuring surface, because the hands have sweat and other dirt can contaminate the measuring surface, making it rust. Measuring do with other tools, and metal substances mixed together so as not to bruise measuring tools.
5 gage storage place should be kept clean, dry, no vibration, no corrosive gas, and to stay away from a large range of temperature change place or places where magnetic fields. Storage box measuring gages to clean and dry, are not allowed to store other debris.
6, when the surface has burrs, must go to the net burr, and then measure, or make measuring wear, and will affect the measurement accuracy of the results.
订阅:
博文 (Atom)