Embossed aluminum strip in the clever use of technology

Aluminum Strip is embossed craft new production equipment, has a hard texture solid materials, high precision, good resistance to deformation, pressure, etc., to achieve the letterpress process standardization, improve work efficiency and quality of printing, providing a more reliable guarantee.

Routinely use in letterpress letterpress printing process is generally used aluminum strip version of the heart, fill materials and gear version edges. In addition to its use can be extended to the version prop up the application process to achieve a multi-purpose. Printing process printing small-format illustrations, masthead, its traditional production process, are generally used as a plywood version of care, but this version of care owed to a solid and easy to deformation, as well as prints often appear burrs and blur phenomena.

Therefore, this version of the prop is difficult to re-use, waste of valuable timber resources. Based on the above, if the height (the thickness of the aluminum is) less than the aluminum strip, after the booster clever, zinc paste can be used for printing plates or resin plate. The original thickness of the aluminum strip with empty aluminum is almost the same height, to be entrusted with the purported print edition, and its thickness is clearly not enough.

If using the cardboard bottom aluminum pad to pad printing several layers to achieve the desired height, the printing pressure is due to a solid, affect the printing quality. Such as the use of space in an appropriate thickness of lead, with double-sided tape to paste it directly into the back of the aluminum tray method, so long as the aluminum strip at each end of a blank sticky lead weights can be achieved by printing the desired height. Because aluminum strip is thick and hard, the middle of no pad affixed hanging segment printing pressure can still maintain a uniform state.

Article purported version using aluminum prop used, can facilitate and improve the layout printed pieces small group version and installed version efficiency, but also improves the printing quality is better, and the version of the prop can be repeatedly used, the application effect is satisfactory.

How to care for aluminum detection tool

In aluminum production, measurement tools for inspectors as their weapons. If the weapon is semi-paralyzed or damage to state that the test results would not make any sense, but there is no supervision of product quality control role. Therefore, measuring the maintenance and care is very important. Here are a few measurement tool maintenance specifications (for commonly used detection tool):

1 Measuring exhausted after, to clean surface stains, Aluminum Strip, loosen the fastening device, when the long-term (one month or more) when not in the measurement surface to be oiled. Gage when not, to put it in a protective case, it is best to use someone full-time, and do measuring unit testing by the authoritative annual record.

(2) Do not use the caliper jaws as the stylus tip, compasses, or other tools, are not allowed to artificially twist two jaws or to gauge when the card board uses.

3 Do not oil stone, emery cloth and rub the surface of measuring surface and measuring reticle part non-metering maintenance personnel, non-demolition, alteration and unauthorized repairs gauges.

4 Do not touch the gage measuring surface, because the hands have sweat and other dirt can contaminate the measuring surface, making it rust. Measuring do with other tools, and metal substances mixed together so as not to bruise measuring tools.

5 gage storage place should be kept clean, dry, no vibration, no corrosive gas, and to stay away from a large range of temperature change place or places where magnetic fields. Storage box measuring gages to clean and dry, are not allowed to store other debris.

6, when the surface has burrs, must go to the net burr, and then measure, or make measuring wear, and will affect the measurement accuracy of the results.